Subject: Aerosol Products

Revised July 2025

Purpose: Aerosol Products operational permit is required to manufacture, store or handle an aggregate quantity of Level 2 or Level 3 aerosol products more than 500 pounds net weight. All Aerosol Products shall also meet the requirements of the Hazardous Materials Operation Permit if quantities or contents classify them as a Hazardous Materials. If not classified as Hazardous Materials the storage of aerosol products must meet the requirements for the Aerosol Products operational permit and shall be renewed on an annual basis. Aerosol products are defined by the adopted code as, a combination of a container, a propellant and a material that is dispensed. Aerosol products shall be classified by means of the calculation of their chemical heats of combustion and shall be designated Level 1, Level 2 or Level 3.

•  Level 2 aerosol product: Those with a total chemical heat of combustion that is greater than 8,600 Btu/lb (20 kJ/g), but less than or equal to 13,000 Btu/lb (30 kJ/g).

• Level 3 aerosol product: Those with a total chemical heat of combustion that is greater than 13,000 Btu/lb (30kJ/g).

Fees: $240.00 Annually

Requirements: An Aerosol Products permit will be issued once an application has been completed appropriately, all applicable documents have been uploaded, and a hazardous materials permit has been applied for in conjunction with the Aerosol Products permit.

Applications will be completed electronically, and all required documentation shall be uploaded electronically. There shall be no paper submissions. Permit application shall be completed and submitted through the approved Harris County software program. Once the application is received along with all required documentation, the Fire Code Official will conduct a review. When the permit process is complete, and authorization is given, the applicant will be notified that the permit is issued, and the duration of the permit will be indicated.

All Aerosol Products permit applications will begin with generalized information requirements. This information will pertain to the property information/property owner’s information/application information/project name.

When applying for an Aerosol Products operational permit the applicant shall provide the following information: 

• Site map identifying the location of all on-site fire suppression to include fire pumps, ponds, water supplies, layout of fire lanes, gas meter, and Knox Box if installed. If renewing an aerosol products operational permit and no changes have been made to your facility from previous permit cycle, a written statement claiming no changes have been made can be submitted in lieu of plans;

•  A drawing/ floor plan of building containing aerosol products including all entrance and exits, location of primary and secondary exit routes, location of fire extinguishers, fire protection system panels, risers, and/or other fire protection control systems and/or panels, etc. If renewing an aerosol permit and no changes have been made to your facility from previous permit cycle, a written statement claiming no changes have been made can be submitted in lieu of plans; 

• Copy of the emergency plan, compliant with Chapter 4 of the International Fire Code, current adopted edition;

• Information on types of fire alarm systems installed and last inspection date (provide last inspection report or photo of current inspection tag(s). This shall include all fire alarm systems or other gas detection systems at the facility; 

• Information on installed sprinkler systems and last inspection date (provide last inspection report or photo of current inspection tag(s). This shall include all fire sprinkler systems at the facility; 

• Information on fire extinguishers or any type of alternate (including but not limited to automatic hood suppression, paint booth systems, clean agent) fire protection system installed and last inspection date (provide last inspection report or photo of current inspection tag(s)); 

• Detailed written description of the on-site operation (retail, manufacturing, storage, use, etc.); 

• Copy of the inventory lists for all products packaged in aerosol form;

• A written statement certifying storage and use of hazardous materials is in compliance with the adopted International Fire Code (IFC) Chapters 50-67.

If one or more of the requested documents does not apply to your location, please submit in writing a reason for not submitting.

Denial: If it is determined that an application fails to meet the requirements as set forth in this standard or the applicant refuses to provide all required documentation, the fire code official shall not issue a permit, but shall return the application to the applicant with explanation for refusal.

Revocation: The fire code official is authorized to revoke a permit where it is found that there has been false statements or misrepresentation as to the material facts in the application or supporting documentation on which the approval and issuance was based, the permit was issued to a different person or firm than named on the permit, the permittee failed, refused or neglected to comply with orders or notices duly served in accordance with the provisions of this code within the time provided therein, or the permit was issued in error or in violation of an ordinance, regulation or this code.